This is soon to be replaced (can't afford it quite yet!), but the antenna has failed. The part number is E35009...... I know that this is no longer available, but what can I use as a substitute that will be compatible with the 435?See More
is there a cable end cover that will protect the loose cables when you remove the display. I have 2 cable ends loose sitting on the console unprotected. the power cable for the C140W and the cable from the FF module. I want to seal them when not in use so corrosion can;t enter them.See More
Hi, I just bought a 2001 Sea Ray Sedan Bridge 480 equipped with a Raymarine Open Array radar and an old CRT display (original from Sea ray). It is also connected to s ST6001+ Autopilot and Bi-Data. Can I install my extra equipment (C80 multifonction display) and replace this green on black (CRT) display? Also, I do have a DSM300 to install and a SR50 Sirius Weather + radio receiver.Any input / recommendation would be GREATLY appreciated!FredSee More
"Well, inadequate calibration could certainly account for the gauge being inaccurate. (however the gauge has been calibrated using a 5-point calibration).
That being said, the primary issue I am pointing out is that the two gauges…"
"Welcome to the Raymarine Technical Forum Mikael,
Software updates to the SeaTalk to SeaTalkng Converter Kit have enabled its use with autopilots. As such, any SeaTalk instruments, autopilot components, GPS sensors, and chartplotters featuring…"
"Welcome to the Raymarine Technical Forum Goran,
Unfortunately, Raymarine has not quantified the cartography performance differences between the C-Series Classic MFDs and the C-Series Widescreen MFDs. Unlike the C-Series Classic MFDs, the…"