Will Ritch-Smith
  • Male
  • Portland, ME
  • United States
Share
  • Blog Posts
  • Discussions (8)
  • Events
  • Photos
  • Photo Albums
  • Videos

Will Ritch-Smith's Discussions

EV1 wheel jerking back and forth

Started this discussion. Last reply by Michael Carson Jan 27. 15 Replies

The wheel rapidly spins back and forth, even on the lowest response setting, with my new EV-1 and hydraulic linear drive.  When motoring and there is very little load on the helm, a small correction…Continue

Gifts Received

Gift

Will Ritch-Smith has not received any gifts yet

Give a Gift

 

Will Ritch-Smith's Page

Latest Activity

Michael Carson replied to Will Ritch-Smith's discussion EV1 wheel jerking back and forth
"I am having the same problem and this is very frustrating. EV1 with ACU400 p70 and rudder position sensor.  Vessel is a 53' sailboat. Displacement is approx 55,000lbs. Steering system is a Whitlock Mamba and the drive unit is a Robertson…"
Jan 27
Underway - Raymarine, US replied to Will Ritch-Smith's discussion EV1 wheel jerking back and forth
"Check if Calibration Lock is ON in Vessel Settings.  Make sure that is OFF before you will see rudder damping information."
Jul 16, 2015
Will Ritch-Smith replied to Will Ritch-Smith's discussion EV1 wheel jerking back and forth
"OK---so I removed the autopilot from the boat, had the software updated, reinstalled and I still do not have a "Rudder Damping" setting under menu>setup>autopilot>calibration>drive settings. Also, I tested the rudder indicator…"
Jul 13, 2015
Underway - Raymarine, US replied to Will Ritch-Smith's discussion EV1 wheel jerking back and forth
"Without a compatible Raymarine MFD your options are; bring the Raymarine electronics components to the Raymarine dealer from whom they were purchased ... recommend contacting the dealer before removing any equipment from the boat hire…"
Jul 6, 2015
Will Ritch-Smith replied to Will Ritch-Smith's discussion EV1 wheel jerking back and forth
"It looks like I do not.  My display is 2.12 and the latest is 2.17.   I'm a little confused about my EV-1--my notes say the software I have is 1.11, but it doesn't appear on the Raymarine website that there is such a version. At…"
Jun 30, 2015
Underway - Raymarine, US replied to Will Ritch-Smith's discussion EV1 wheel jerking back and forth
"You want to make sure you are at the latest version of software, for the system, p70, EV-1 and ACU-100."
Jun 30, 2015
Will Ritch-Smith replied to Will Ritch-Smith's discussion EV1 wheel jerking back and forth
"Hmmm....I haven't seen that setting but it sounds like exactly what I need.  I'll check it out next time I'm on the boat."
Jun 30, 2015
Underway - Raymarine, US replied to Will Ritch-Smith's discussion EV1 wheel jerking back and forth
"OK, how about the Rudder Damping number, under MENU>SETUP>AUTOPILOT CALIBRATION>DRIVE SETTINGS."
Jun 30, 2015
Will Ritch-Smith replied to Will Ritch-Smith's discussion EV1 wheel jerking back and forth
"That was the first thing I tried.  It's on leisure."
Jun 29, 2015
Underway - Raymarine, US replied to Will Ritch-Smith's discussion EV1 wheel jerking back and forth
"Try changing the Response level you have set in the system?  What is the current Response you have set now?"
Jun 29, 2015
Will Ritch-Smith replied to Will Ritch-Smith's discussion EV1 wheel jerking back and forth
"I moved the pin that the rudder sensor connects 4 or 5 inches further out on the steering quadrant--further from the rudder post.  This means movement of the rudder produces a larger movement of the rudder indicator than it had previously.…"
Jun 27, 2015
Will Ritch-Smith replied to Will Ritch-Smith's discussion EV1 wheel jerking back and forth
"The markings on the drive are worn off or were painted over but it appears to be a Robertson HLD200L.   Product listing Manual"
Jun 26, 2015
Underway - Raymarine, US replied to Will Ritch-Smith's discussion EV1 wheel jerking back and forth
"Do you have a model number of the Robertson drive?  I need to know information on it to understand the issue."
Jun 23, 2015
Will Ritch-Smith replied to Will Ritch-Smith's discussion EV1 wheel jerking back and forth
"I'm using the EV-400 sail and the driver from an older Robertson AP."
Jun 22, 2015
Underway - Raymarine, US replied to Will Ritch-Smith's discussion EV1 wheel jerking back and forth
"What is the ACU being used in the system?  What is the model number of the 3rd party hydraulic linear drive?"
Jun 22, 2015
Will Ritch-Smith posted a discussion

EV1 wheel jerking back and forth

The wheel rapidly spins back and forth, even on the lowest response setting, with my new EV-1 and hydraulic linear drive.  When motoring and there is very little load on the helm, a small correction will start the drive pumping back and forth and the wheel spinning back and forth.  If I put my hand on the wheel for a moment to stop the spinning everything is fine for awhile.This does not happen when the helm is loaded up--when I'm sailing and there is a little bit of pressure on the helm.The…See More
Jun 19, 2015

Profile Information

Models of Raymarine Product(s) Owned or Considering
ST 60 instruments
EV 400 AP

Comment Wall

You need to be a member of Raymarine Technical Forum to add comments!

  • No comments yet!
 
 
 

Events

Videos

  • Add Videos
  • View All

Photos

  • Add Photos
  • View All

Latest Activity

Donald Evans replied to Bruce Bayne's discussion Wiring a RayStar 125 to NMEA 0183
"Regarding the NMEA side of an RS125, as it can transmit NMEA data when correctly wired, does this also mean you can wire a standard NMEA GPS receiver to the same point?"
Oct 13
Mark Van Thillo replied to Tim Sheesley's discussion RD418HD parts needed parts diagram?
"Hello, I need to replace the insides of my radar RD418HD and don't need to replace the cover. is their a part number for this? Thank you for your help. Mark"
Oct 9
Jim Pra liked Jon Fitch's discussion Waypoint/route upload to new e series MFD
Oct 4
Joseph J. Job liked Joseph J. Job's profile
Oct 1
Donald Evans replied to Scott A Crego's discussion NMEA0183 (R08004) for my A65
"llllll"
Sep 23
Donald Evans replied to Scott A Crego's discussion NMEA0183 (R08004) for my A65
"Replacement NMEA cables are to be found here: http://www.gps-galore.co.uk/?product_cat=nmea-0183-cable What happened? did someone scrub the link off? There are so many people out there that can't afford to buy new plotters. Please leave it on…"
Sep 23
Donald Evans replied to Scott A Crego's discussion NMEA0183 (R08004) for my A65
Sep 23
James Riley updated their profile
Sep 16
Stephen Gwyn replied to John M Busciglio's discussion ST1000+ ST2000+ Autopilot PARTS needed
"I had the same problem with the ram tube spinning. I opened up the case to find circular bits of plastic at the bottom of the case. I made a bushing to fit between 4. the lead screw drive pulley and 7 the gear box support plate out some food…"
Sep 14
walt hoover replied to walt hoover's discussion autopilots
"I'm now installing the autopilot type 2 pump. When connecting into the steering system can I just tee into the three hydraulic lines or is there a different circut setup. My instruction sheet has me a bit stumped because it shows the pump…"
Sep 10
David Lane updated their profile
Aug 29
dave abrams replied to Erik Hillenmeyer's discussion NMEA GPS to DSC VHF connection
"My set up is all raymarine, S6002 autopilot and an A70 display.  how can I connect my dsc vhf to pick up the gps signal?  hopefully I can do this on the pedistile and not have to run wires back to th computer.  plas keep it simple if…"
Aug 18
Gregory S******* updated their profile
Aug 10
Folkmeister replied to Mikael H's discussion Show vessels name from AIS
"Reactivating this old thread -   My prior boat had an e7 and AIS650 which worked great, vessel names were displayed with target info.  My new boat has older e80 and e120 plotters.  We have just installed AIS, but the vast majority of…"
Aug 10
Carol Shores updated their profile
Aug 8
Jorge Chubretovich updated their profile
Aug 3

© 2018   Created by Moderator - Raymarine, US.   Powered by

Badges  |  Report an Issue  |  Terms of Service