My Volvo Penta KAMD300A engines use the EDC1 electronic diesel control. The Volvo diagnostic tool VODIA reads out all the engine parameters when connected to the 2-wire engine diagnostic port by the Volvo service technicians.  I would like buy a couple of the ECI-100 to read the data and display it on my a67 MFD which is connected to my NMEA 2000 network.  Does anyone know if the EDC1 is compatible with the ECI-100?  EDC is the vintage before the Volvo Penta EVC electronic vessel control.  I assume that the EDC1, EDC4, and EVC are all SAE J1939 compliant since the VODIA can read them all (using different wiring adapters).  I am hoping a Raymarine engineer can help me on this.  Thanks, Ross

Views: 229

Comment

You need to be a member of Raymarine Technical Forum to add comments!

Comment by David Jovanovic on November 24, 2017 at 9:51am

I hawe the same question !

Regards

Events

Videos

  • Add Videos
  • View All

Photos

  • Add Photos
  • View All

Latest Activity

J&G Marine supply replied to Don Gulliver's discussion AIS recommissioning
"Where on the web is the procedure to reset the mmsi.  Iknow pro ais to program but how do you clear the old mmsi"
yesterday
Richard Gard liked Tom MacAllister's discussion E80 Issues
yesterday
Richard Gard liked Miguel Gonzalez del Rey's discussion E120 -E80
yesterday
Richard Gard replied to Adam Hyde's discussion New C125 won't display NMEA 0183 depth data
"subscribed"
yesterday
Richard Gard liked Adam Hyde's discussion New C125 won't display NMEA 0183 depth data
yesterday
TJ replied to Gerhard Lang's discussion CompactFlash card for E120/E80 classic series, data exchange waypoints and routes
"FAT 32 or 16 the compatibility tool is gone now."
Saturday
Tim Turner replied to Tim Turner's discussion ST60+ Wind
"will that transducer work with a st50?"
Jul 2
Jan-Erik replied to Jan-Erik's discussion New boat with all Raymarine electronics
Jun 29
Tony O replied to Brad's discussion Rejoining cut Raynet cable for radar
"My radar  stopped working and I found a small Nick in my cable. Seeing that I could not get access to the place where the cable was run, I decided to open the cable to see how many wires were cut. Luckily there was only one so I Soldered them…"
Jun 25
Jindrich Dokonal replied to Robert Dahn's discussion ST70 Plus Power Cable
"Hi, How can I purchase a power cable for my ST70+plus display? Best regards, Henry"
Jun 25
Tom replied to Tom's discussion Pink "jelly fish" like icon meaning on chart
"I returned and got a picture. What does it mean?https://i.imgur.com/Du4JdEL.jpg"
Jun 19
Lasse Åhlander updated their profile
Jun 16
Russell Herbert updated their profile
Jun 14
Jim Donald updated their profile
Jun 13
marcelo wainer replied to marcelo wainer's discussion Smart Pilot x-5
"Hello. I have a Smart Pilot X-5 and when is in AUTO its change the course always to port side and in 2 minuters its lost the way. I made the seatrial and recalibrate the compass but the problem persists. What can I do.?Thank you very much."
Jun 11
Michael Pappert updated their profile
Jun 3

© 2018   Created by Moderator - Raymarine, US.   Powered by

Badges  |  Report an Issue  |  Terms of Service