Thank you for your interest in the new third generation a,c and e-Series MFD's in regards to dual radar installation.
Unfortunately, Raymarine policy prohibits Raymarine employees from addressing questions…"
Currently there is no part number in the system for the ST70 Plus display E22115 power cable. The requests for the ST70 Plus display E22115 power cable are handled directly on a case by case basis.
I just purchased a new E125 and CP450C sounder with version 6.27 and would appreciate if when new software is available ALL new additions be listed in the description of the revision. In looking at the features added the one you mention…"
"Welcome to the Raymarine Technical Forums Robert,
With the most recent software update, v7.35 you will be able to retain manual adjustment of sounder setting presets, it will no longer go back to Auto when the unite is turned off. You can click…"
I have notified the appropriate parties that the supplied hard copy of the flush mount template is not printed to scale. Unlike the version of AIS950 Installation Template which has been posted on Raymarine's web site, there…"
"Reactivating this old thread - My prior boat had an e7 and AIS650 which worked great, vessel names were displayed with target info. My new boat has older e80 and e120 plotters. We have just installed AIS, but the vast majority of…"
"My radar stopped working and I found a small Nick in my cable. Seeing that I could not get access to the place where the cable was run, I decided to open the cable to see how many wires were cut. Luckily there was only one so I Soldered them…"