I have a Furuno 1734C with radar. My auto pilot and fluxgate compass are Autohelm. I have the cable to send course data to the radar on the Nav Net and I need to know where to connect the leads on the course computer. There is an extra set of NMEA + and- ports on the course computer. I assume I connect there and to Port 2 on the Nav Head. Will you help?
"I had the same problem with the ram tube spinning. I opened up the case to find circular bits of plastic at the bottom of the case. I made a bushing to fit between 4. the lead screw drive pulley and 7 the gear box support plate out some food…"
"I'm now installing the autopilot type 2 pump. When connecting into the steering system can I just tee into the three hydraulic lines or is there a different circut setup. My instruction sheet has me a bit stumped because it shows the pump…"
"My set up is all raymarine, S6002 autopilot and an A70 display. how can I connect my dsc vhf to pick up the gps signal? hopefully I can do this on the pedistile and not have to run wires back to th computer. plas keep it simple if…"
"Reactivating this old thread - My prior boat had an e7 and AIS650 which worked great, vessel names were displayed with target info. My new boat has older e80 and e120 plotters. We have just installed AIS, but the vast majority of…"