Models of Raymarine Product(s) Owned or Considering
c120 classic software update currently V4.29.
I downloaded the updates per instructions onto the CF Ive used before for updating to V4.29, but when inserted into the MFD & turned on no software update is message shows. Do I need to reset the unit first before installing?
You need to be a member of Raymarine Technical Forum to add comments!
"I had the same problem with the ram tube spinning. I opened up the case to find circular bits of plastic at the bottom of the case. I made a bushing to fit between 4. the lead screw drive pulley and 7 the gear box support plate out some food…"
"I'm now installing the autopilot type 2 pump. When connecting into the steering system can I just tee into the three hydraulic lines or is there a different circut setup. My instruction sheet has me a bit stumped because it shows the pump…"
"My set up is all raymarine, S6002 autopilot and an A70 display. how can I connect my dsc vhf to pick up the gps signal? hopefully I can do this on the pedistile and not have to run wires back to th computer. plas keep it simple if…"
"Reactivating this old thread - My prior boat had an e7 and AIS650 which worked great, vessel names were displayed with target info. My new boat has older e80 and e120 plotters. We have just installed AIS, but the vast majority of…"