Herve Pugin
  • Male
  • St David's
  • Grenada
Share
  • Blog Posts
  • Discussions (13)
  • Events
  • Photos
  • Photo Albums
  • Videos

Herve Pugin's Discussions

AIS500 with 2 E series classic plotters

Started this discussion. Last reply by Moderator - Raymarine, US Jan 8, 2016. 1 Reply

I wanted to know if it is possible to connect a AIS500 to a boat equipped with 2 plotter E series Classic (1 x E120 and 1 x E80)The NMEA port on the master E120 plotter is already set at 4,800 bps…Continue

TackTick PSET

Started this discussion. Last reply by Bad Marc - Raymarine.US Nov 17, 2015. 1 Reply

Hello,When power up a wind display the message on the screen flashing "PSET" and switch off.Did someone know what it is? Can it be battery dead and solar panel cannot get enough power to warm it?Unit…Continue

Autopilot change to standby by itself

Started this discussion. Last reply by Underway - Raymarine, US May 22, 2015. 3 Replies

A client report his autopilot change from auto to standby by itself without alarm.Material on boat:Smart pilot S3G E12092 (no sleep switch connected) v3.02Display ST6002 ver 5.00SmartController…Continue

Tags: Standby

Update I70 from V1.08

Started this discussion. Last reply by Underway - Raymarine, US Jan 30, 2015. 3 Replies

Hi Cannot update I70 from V1.08 to V2.18.Try many time but not working from a E7. I have an old update but it from a Aserie or Ewide and inside this update I can see an I70_Splash_1_1.pkg and a…Continue

Tags: software

Gifts Received

Gift

Herve Pugin has not received any gifts yet

Give a Gift

 

Herve Pugin's Page

Latest Activity

Herve Pugin replied to cliff mesirov's discussion Mirroring via VGA to HD TV
"I have a trouble with a Gs95 HDMI output, Is the format the same: 720P ?"
Dec 11, 2017

Profile Information

Models of Raymarine Product(s) Owned or Considering
Chartploter, instruments, autopilot, radar, VHF.

Comment Wall

You need to be a member of Raymarine Technical Forum to add comments!

  • No comments yet!
 
 
 

Events

Videos

  • Add Videos
  • View All

Photos

  • Add Photos
  • View All

Latest Activity

Donald Evans replied to Bruce Bayne's discussion Wiring a RayStar 125 to NMEA 0183
"Regarding the NMEA side of an RS125, as it can transmit NMEA data when correctly wired, does this also mean you can wire a standard NMEA GPS receiver to the same point?"
Oct 13
Mark Van Thillo replied to Tim Sheesley's discussion RD418HD parts needed parts diagram?
"Hello, I need to replace the insides of my radar RD418HD and don't need to replace the cover. is their a part number for this? Thank you for your help. Mark"
Oct 9
Jim Pra liked Jon Fitch's discussion Waypoint/route upload to new e series MFD
Oct 4
Joseph J. Job liked Joseph J. Job's profile
Oct 1
Donald Evans replied to Scott A Crego's discussion NMEA0183 (R08004) for my A65
"llllll"
Sep 23
Donald Evans replied to Scott A Crego's discussion NMEA0183 (R08004) for my A65
"Replacement NMEA cables are to be found here: http://www.gps-galore.co.uk/?product_cat=nmea-0183-cable What happened? did someone scrub the link off? There are so many people out there that can't afford to buy new plotters. Please leave it on…"
Sep 23
Donald Evans replied to Scott A Crego's discussion NMEA0183 (R08004) for my A65
Sep 23
James Riley updated their profile
Sep 16
Stephen Gwyn replied to John M Busciglio's discussion ST1000+ ST2000+ Autopilot PARTS needed
"I had the same problem with the ram tube spinning. I opened up the case to find circular bits of plastic at the bottom of the case. I made a bushing to fit between 4. the lead screw drive pulley and 7 the gear box support plate out some food…"
Sep 14
walt hoover replied to walt hoover's discussion autopilots
"I'm now installing the autopilot type 2 pump. When connecting into the steering system can I just tee into the three hydraulic lines or is there a different circut setup. My instruction sheet has me a bit stumped because it shows the pump…"
Sep 10
David Lane updated their profile
Aug 29
dave abrams replied to Erik Hillenmeyer's discussion NMEA GPS to DSC VHF connection
"My set up is all raymarine, S6002 autopilot and an A70 display.  how can I connect my dsc vhf to pick up the gps signal?  hopefully I can do this on the pedistile and not have to run wires back to th computer.  plas keep it simple if…"
Aug 18
Gregory S******* updated their profile
Aug 10
Folkmeister replied to Mikael H's discussion Show vessels name from AIS
"Reactivating this old thread -   My prior boat had an e7 and AIS650 which worked great, vessel names were displayed with target info.  My new boat has older e80 and e120 plotters.  We have just installed AIS, but the vast majority of…"
Aug 10
Carol Shores updated their profile
Aug 8
Jorge Chubretovich updated their profile
Aug 3

© 2018   Created by Moderator - Raymarine, US.   Powered by

Badges  |  Report an Issue  |  Terms of Service