I have Raytech 6.2 Software and also own a NT+/PC C-Map chart. Both are installed on my Portable - The C-Map I use with Seatrack Racing software, works fine. Now I would also like to use the C-Map…Continue
You're welcome. With respect to the question concerning node locked charts. Many C-Map NT+/PC Selector Cartography purchasers do not additionally purchase a C-Map USB dongle. For such customers, the chart unlock code…"
"I have C-Map version 22. So that is beyond v16. My Raytech is originally a version 6.1, with upgrade. Running on a 64-bits W7 on the desktop, and 32-bits on laptop.
I have deinstalled everything on the desktop, including Seatrack. Deleted all…"
The optimum route feature was designed to support long distance offshore racing, not inshore racing. As such, it does not rely upon local tide/current data, but rather utilizes a climatological ocean current GRIB file (ocean2.grb)…"
"Did everything you recommended.
Deinstalled everything - Raytech RNS, NT+/PC Selector, also cleaned registry.
Reinstalled Raytech RNS, ran it 1 time and closed it. Reinstalled NT+/PC selector, opened it and found that my CMAP chart was still…"
"Not working yet.... De-installed NT+ and the Hardware Keycheck for my dongle..... Reinstalled, and then my map still appeared to be valid licensed.... Raytech would not pick that up.
Does this mean I also need to Delete my map before De-Installing…"
"So, my C-Map software was installed indeed before Raytech. SO the only thing I should do is uninstall NT+/PC selector... reinstall it, and reinstall my chart license....
Hate to do so, since I had troubles with C-Map activation codes... but…"
"Welcome to the Raymarine Technical Forum Gijs,
When using C-Map NT+/PC Selector Cartography in conjunction with RayTech software, the RayTech software must be installed on the PC, run, and then exited one time prior to installing the C-Map NT+/PC…"
I have Raytech 6.2 Software and also own a NT+/PC C-Map chart. Both are installed on my Portable - The C-Map I use with Seatrack Racing software, works fine. Now I would also like to use the C-Map within Raytech for Long Distance Route Optimizing..... But the chart is not pick-up or recognized although Raytech claims it automatically would....C Map chart is installed in C:\Program Data-C MAP NT PC Selector - charts.... default directory. PC runs Windows 7.Why is this not working? Can I change a…See More
"I had the same problem with the ram tube spinning. I opened up the case to find circular bits of plastic at the bottom of the case. I made a bushing to fit between 4. the lead screw drive pulley and 7 the gear box support plate out some food…"
"I'm now installing the autopilot type 2 pump. When connecting into the steering system can I just tee into the three hydraulic lines or is there a different circut setup. My instruction sheet has me a bit stumped because it shows the pump…"
"My set up is all raymarine, S6002 autopilot and an A70 display. how can I connect my dsc vhf to pick up the gps signal? hopefully I can do this on the pedistile and not have to run wires back to th computer. plas keep it simple if…"
"Reactivating this old thread - My prior boat had an e7 and AIS650 which worked great, vessel names were displayed with target info. My new boat has older e80 and e120 plotters. We have just installed AIS, but the vast majority of…"