I have a new Dragonfly model E7008 which I just installed on a small Keywest 176I loose bottom lock at speeds above 5 mph. I have tried several different locations for the transducer. I setup an…Continue
The mount of the Dragronfly/CP100 transom mounted transducers features lash ... this is normal, and will permit the trailing end of the transducer to have as much as 1/2" of vertical play. When operating in CHIRP mode, bottom should…"
"It is very difficult to take the pictures you have requested since the boat is in the water. I have never had this issue before with either thru hull or transom mounted transducers, is there something that that makes this xducer very sensitive ?…"
"Welcome to the Raymarine Technical Forum Fred,
Please add some digital photos to the discussion showing the transom of the vessel, underside of the hull (looking forward from the transom, and a side profile of the transducer mounted on the transom."
I have a new Dragonfly model E7008 which I just installed on a small Keywest 176I loose bottom lock at speeds above 5 mph. I have tried several different locations for the transducer. I setup an arrangement using a 1x3 by 4ft extension which allows me to move the transducer without drilling new holes each time. I even tried clamping it on the side , well away from the motor etc. That didn't help, same results.Ant thoughts would be appreciated.Fred Lighthouse Point, Fl.See More
"Question regarding the RAY49E VHF.
I'm rewiring the system.
The NMEA output of the VHF, with the NMEA datasets DSC and DSE. How are they processed further in the system? It will be linked with a MFD C127.
Thanks in advance. "