Adam Hyde
  • Male
  • Vancouver, BC
  • Canada
Share
  • Blog Posts
  • Discussions (34)
  • Events
  • Photos
  • Photo Albums
  • Videos

Adam Hyde's Friends

  • Derek

Adam Hyde's Discussions

Engine Alarms require too many button presses on ignition

Started this discussion. Last reply by Moderator - Raymarine, US Oct 24, 2014. 5 Replies

With Lighthouse II v. 11.26 the newly added multiple engine Alarms are problematic.   When you start the engine there must be a NMEA 2000 handshake with the PGN's from the engine which causes every…Continue

2D Shading Bug

Started this discussion. Last reply by Moderator - Raymarine, US Aug 17, 2015. 9 Replies

I have a C125.I'm using Software Version: v10.34Since the upgrade I've noticed that when I power on the chart plotter my 2D Map shows shading until I go to the menu:  Presentation/Overlays and then…Continue

C125 with Crusader ECM-07 System

Started this discussion. Last reply by Moderator - Raymarine, US Sep 5, 2013. 3 Replies

Do you know if the C125 MFD will display engine data from a 2009 Crusader Engine with the ECM-07 data harness?   Is some kind of converter needed?Continue

RCU-3 Functionality Problem

Started this discussion. Last reply by Moderator - Raymarine, US Feb 25, 2014. 8 Replies

I just purchased the RCU-3 Remote for my new C-125 plotter.    I have hooked it up fine but remain puzzled at the following:  Page 4 of the manual says you can "toggle menu items and options in…Continue

Tags: Remote, C125, RCU-3

Gifts Received

Gift

Adam Hyde has not received any gifts yet

Give a Gift

 

Adam Hyde's Page

Profile Information

Models of Raymarine Product(s) Owned or Considering
C 125

Comment Wall (2 comments)

You need to be a member of Raymarine Technical Forum to add comments!

At 3:15am on October 6, 2013, Gerry Cooper said…

Adam, got your response thanks. I'm trying to use an existing Simrad wind speed/direction and depth package to connect to the C125 - without using the displays. Both the instruments are relatively new and work ok so just want the outputs. It looks like with the ITC-5 I can connect the masthead and depth transducer but we shall see.

Regards

At 11:14am on October 5, 2013, Gerry Cooper said…

Adam,

When you were connecting the Standard Horizon depth sounder to your C125, was it just the output from the transducer and if so, did it have to go through any other device (like the ITC-5). I'm looking to keep my depth sounder transducer, and wind speed/direction head and connect both to a C125 but thought it would have to be through the ITC-5.

 

Regards

 
 
 

Events

Videos

  • Add Videos
  • View All

Photos

  • Add Photos
  • View All

Latest Activity

Donald Evans replied to Bruce Bayne's discussion Wiring a RayStar 125 to NMEA 0183
"Regarding the NMEA side of an RS125, as it can transmit NMEA data when correctly wired, does this also mean you can wire a standard NMEA GPS receiver to the same point?"
Oct 13
Mark Van Thillo replied to Tim Sheesley's discussion RD418HD parts needed parts diagram?
"Hello, I need to replace the insides of my radar RD418HD and don't need to replace the cover. is their a part number for this? Thank you for your help. Mark"
Oct 9
Jim Pra liked Jon Fitch's discussion Waypoint/route upload to new e series MFD
Oct 4
Joseph J. Job liked Joseph J. Job's profile
Oct 1
Donald Evans replied to Scott A Crego's discussion NMEA0183 (R08004) for my A65
"llllll"
Sep 23
Donald Evans replied to Scott A Crego's discussion NMEA0183 (R08004) for my A65
"Replacement NMEA cables are to be found here: http://www.gps-galore.co.uk/?product_cat=nmea-0183-cable What happened? did someone scrub the link off? There are so many people out there that can't afford to buy new plotters. Please leave it on…"
Sep 23
Donald Evans replied to Scott A Crego's discussion NMEA0183 (R08004) for my A65
Sep 23
James Riley updated their profile
Sep 16
Stephen Gwyn replied to John M Busciglio's discussion ST1000+ ST2000+ Autopilot PARTS needed
"I had the same problem with the ram tube spinning. I opened up the case to find circular bits of plastic at the bottom of the case. I made a bushing to fit between 4. the lead screw drive pulley and 7 the gear box support plate out some food…"
Sep 14
walt hoover replied to walt hoover's discussion autopilots
"I'm now installing the autopilot type 2 pump. When connecting into the steering system can I just tee into the three hydraulic lines or is there a different circut setup. My instruction sheet has me a bit stumped because it shows the pump…"
Sep 10
David Lane updated their profile
Aug 29
dave abrams replied to Erik Hillenmeyer's discussion NMEA GPS to DSC VHF connection
"My set up is all raymarine, S6002 autopilot and an A70 display.  how can I connect my dsc vhf to pick up the gps signal?  hopefully I can do this on the pedistile and not have to run wires back to th computer.  plas keep it simple if…"
Aug 18
Gregory S******* updated their profile
Aug 10
Folkmeister replied to Mikael H's discussion Show vessels name from AIS
"Reactivating this old thread -   My prior boat had an e7 and AIS650 which worked great, vessel names were displayed with target info.  My new boat has older e80 and e120 plotters.  We have just installed AIS, but the vast majority of…"
Aug 10
Carol Shores updated their profile
Aug 8
Jorge Chubretovich updated their profile
Aug 3

© 2018   Created by Moderator - Raymarine, US.   Powered by

Badges  |  Report an Issue  |  Terms of Service