RS130 installation: need to extend the supplied SeaTalkng spur cable

I recently installed the RS130 and the supplied SeaTalkng spur cable is too short. Can the cable be cut and spliced? I need at least 12 more feet. I would rather have an extension cable with one male and one female end but couldn't find one on the Raymarine web site. I am running the spur cable to the E22158 Seatalk1 to SeaTalkng converter.

 

Thanks

Views: 926

Reply to This

Replies to This Discussion

Cutting / splicing SeaTalkNG cables is discouraged. One possibility is plug the existing RS130 spur in to an in-line terminator (A80001) , then 5 meter backbone cable (A06036) to a blue receptacle on your E22158 SeaTalkNG 1 to SeaTalkNG converter.

The SeaTalkng cable supplied with the RS130 is white and the instructions say to plug into a white receptacle on the converter. Will your suggested solution give me the same results?

Yes. On the " in- line terminator" you will see one white & one blue receptacle. Plug the white spur cable in to the white receptacle. Plug the blue backbone cable in to the blue receptacle. On the SeaTalk 1 to SeaTalkNG converter remove 1 of the blue terminator plugs and install the blue backbone cable in it's place.

Hello Ed,

 Mike is 100% correct. Thank you for your clear and concise explanation.

 You cannot extend the spur cable length (the max length for a spur is 6 meters). So in this case you would extend the backbone to the end of the RS130's spur cable and utilize the in-line terminator.

Please see Page 23 of the attached RS130 GPS Receiver Installation Guide.

3.3 SeaTalkng connection overview —

long cable runs

Use the optional SeaTalkng inline terminator to connect the GPS

receiver’s spur cable directly to the extreme end of the SeaTalkng

backbone using the inline terminator. This removes the need for a

T-piece connector and a separate terminator, making it easier to

achieve a long cable run.

Attachments:

Reply to Discussion

RSS

Events

Videos

  • Add Videos
  • View All

Photos

  • Add Photos
  • View All

Latest Activity

J&G Marine supply replied to Don Gulliver's discussion AIS recommissioning
"Where on the web is the procedure to reset the mmsi.  Iknow pro ais to program but how do you clear the old mmsi"
yesterday
Richard Gard liked Tom MacAllister's discussion E80 Issues
yesterday
Richard Gard liked Miguel Gonzalez del Rey's discussion E120 -E80
yesterday
Richard Gard replied to Adam Hyde's discussion New C125 won't display NMEA 0183 depth data
"subscribed"
yesterday
Richard Gard liked Adam Hyde's discussion New C125 won't display NMEA 0183 depth data
yesterday
TJ replied to Gerhard Lang's discussion CompactFlash card for E120/E80 classic series, data exchange waypoints and routes
"FAT 32 or 16 the compatibility tool is gone now."
Saturday
Tim Turner replied to Tim Turner's discussion ST60+ Wind
"will that transducer work with a st50?"
Jul 2
Jan-Erik replied to Jan-Erik's discussion New boat with all Raymarine electronics
Jun 29
Tony O replied to Brad's discussion Rejoining cut Raynet cable for radar
"My radar  stopped working and I found a small Nick in my cable. Seeing that I could not get access to the place where the cable was run, I decided to open the cable to see how many wires were cut. Luckily there was only one so I Soldered them…"
Jun 25
Jindrich Dokonal replied to Robert Dahn's discussion ST70 Plus Power Cable
"Hi, How can I purchase a power cable for my ST70+plus display? Best regards, Henry"
Jun 25
Tom replied to Tom's discussion Pink "jelly fish" like icon meaning on chart
"I returned and got a picture. What does it mean?https://i.imgur.com/Du4JdEL.jpg"
Jun 19
Lasse Åhlander updated their profile
Jun 16
Russell Herbert updated their profile
Jun 14
Jim Donald updated their profile
Jun 13
marcelo wainer replied to marcelo wainer's discussion Smart Pilot x-5
"Hello. I have a Smart Pilot X-5 and when is in AUTO its change the course always to port side and in 2 minuters its lost the way. I made the seatrial and recalibrate the compass but the problem persists. What can I do.?Thank you very much."
Jun 11
Michael Pappert updated their profile
Jun 3

© 2018   Created by Moderator - Raymarine, US.   Powered by

Badges  |  Report an Issue  |  Terms of Service