Views: 8241

Reply to This

Replies to This Discussion

Welcome to the Raymarine Technical Forum Robert,

Unfortunately, replacement microphones for the Ray215 are no longer available and the Ray215 is not compatible with any microphones other than the R49015 (supplied with the Ray215) and the optional E46019 Ray215 Full Function Handset (part of the E46021 Ray230/215 Full Function Second Station Kit w/Speaker).  

The replacement part number for the Ray215 microphone cord is R49060.  

Should you have a failed Ray215 microphone and/or the microphone's cord is in need of replacement, then it is recommended that it be sent to Raymarine's Product Repair Center to be serviced.

Can you provide price for a R49085 replacement cord?

Also price to replace it if I send in the mic?


After searching some more on this forum I find different part #'s in differnt replies to a similar request... replacement mic cord for Ray215 radios

One reply states...

The Raymarine Part Number for the Ray215 Mic Cord is: R49060  and another 

The Raymarine Part Number for the Ray215 Mic Cord is: R49085

Can you clarify... Are these both applicable?  what the difference is?

My Ray215 mic has channel up/down buttons and emergency call functions only,



The correct part number for the Ray215 mic cable is R49060.  The R49085 handset cable is designed for use with the Ray230.  These cables are not substitutes for one another.

Raymarine parts may be ordered from an authorized Raymarine dealer or from Raymarine Order Services (; 603.324.7637).  Unfortunately, Raymarine policy prohibits Technical Support from addressing product/parts availability and pricing questions.  Such questions should be addressed to Raymarine's Order Services where the latest information may be obtained.  Raymarine, Inc. does not have access to the inventories of individual dealers.

If the Ray215 fist microphone is intact (i.e. shell not broken), then Raymarine will charge $75 to repair this microphone (including replacement of its cable).

Is repair of the RAY 215 mic (cord replacement only) still possible?


Repair services (cable replacement) for Ray215 microphones continues to be available from Raymarine's Product Repair Center.

I have 2 RAY215 radios and both have working but cracked (missing plastic) microphones. Do I just send the mics, or is there a reason to send the entire unit?

Is there one charge to just fix the mic and another to refurbish the entire unit, or might as well send all for a good going over?

Has anyone come up with a product to better protect the a neoprene cover? Every Sea Ray Sundancer I see has the mic in the same place, right in front of the left knee by the helm. If I get this fixed, I'll need to move it and maybe add a bungee lanyard to avoid contact with the deck.



Forgot to ask... can the second station full function handset be used in place of the regular mic?


As the Ray215 microphone/cable assembly is designed to be easily unplugged from the face of the radio or second station, you need only send the microphone/cable assembly.  That said, sending in the radio will ensure that it is also operating with the latest software and that its circuits are functioning properly.

Is the Ray215 cord still available?  The cover on my cord is disintegrating.

Reply to Discussion




  • Add Videos
  • View All


  • Add Photos
  • View All

Latest Activity

Donald Evans replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"Seems you still don't understand what Cheng is saying."
2 hours ago
M.Catarall replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"Evermore ( Mrs Ariel Cheng ) answered me Today: Hello Lorenzo, Red wire: VCC power (+12V) Green wire: Tx, Output signal White wire: Rx, imput signal Black wire: Ground Gray wire: Shield wire, signal ground Blue wire: Not used I did not think anyone…"
12 hours ago
Donald Evans replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"You're still wrong. Evermore white wire is not the NMEA data out. And don't call me stupid. Get your facts right before commenting."
12 hours ago
M.Catarall replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"The information was not wrong when posted. I suggest you look at the date of the post before adding stupid comments"
17 hours ago
Donald Evans replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"Hahahahaha, you're all totally wrong. Should have bought it from The guy's an expert on these."
Brian Kidwell updated their profile
Ricky Ladd replied to Joel Hjelseth's discussion Raymarine Dragonfly 7 malfunction
"I just installed my new Dragonfly 7 pro when I power it up the Dragonfly emblem comes up it then blinks goes to a blank screen with a blinking in the upper left hand corner then it goes back to the Raymarine emblem sometimes it goes to the accept…"
Aug 8
F John Draeger replied to F John Draeger's discussion Wind transducer data to Corepak 150 autopilot computer with Seatalk to Seatalk ng converter in network
"I am not getting speed information from my Airmar 2039901 transducer to my St50 plus. The reading is 0.0 kn and the transducer is clean. I have checked the connection and it is mechanically good. I have an i50 speed on the mast and I don't get…"
Jul 25
Pablo Luchetti updated their profile
Jul 24
Sophocles Hadjiosif replied to Greg B's discussion Can the P70R be used on a sailboat?
"If you can't auto tack with the p70r then what is the reason that some sailboats elect to install it? Can you program another soft button for tacking?"
Jul 23
David Harwood replied to David Harwood's discussion i50 technical info
"After a multi-year refit, my boat launched last August.  I am now attempting installation of the i50 TriData instrument in stand-alone mode (no network). Connections: 8 discreet connections on lower back of instrument. 1-3 for depth, 4-8 for…"
Jul 22
Gordon Scriba updated their profile
Jul 22
elvira replied to David Poeltl's discussion p70 installation problem
"I have a similar problem.  I have a smartpilot x30 and control head  I have the nmea 0183 connected to my garmin 7000 chartplotter  I receive the fluxgate compass data in my chartplotter, but not the data from my chartplotter in the…"
Jul 15
ALAN IZZARD updated their profile
Jul 12
Luis replied to John Pecora's discussion DSM300 Made in Mexico
"Hello, I have DSM30 bought in 2010. The bar code shows E63074 and on the bottom line */AE63074 1200513* It is connected to a CW90 chart plotter though a hub switch that also connects the radar to the chartplotter. Since the beginning it has an…"
Jul 11
Don Bruce replied to Ray Pantlik's discussion File conversion from .fsh to gpx and gpx to fsh
"Voyage planner is the worst software I have ever had the misfortune to need. I am still looking for a way to convert GPX to FSH files that would preclude me from having to use Voyage planner. GPSutility is good but they want $60 to get the full…"
Jul 10

© 2017   Created by Moderator - Raymarine, US.   Powered by

Badges  |  Report an Issue  |  Terms of Service