I purchased a previously owned boat with all raymarine electronics on it. 2014 SeaHunt Gamefish 25. How can I register everything in my name? E97 with built in sounder with auto pilot, VHF, Sirius weather receiver and Navionics. Any advice on registering the Navionics will be appreciated too.

Views: 92

Reply to This

Replies to This Discussion

Welcome to the Raymarine Technical Forum Bernie,

For warranty purposes, you will need to have the prior owner provide you sales documentation for the Raymarine equipment.  In lieu of this documentation the production date (found within the serial number of each product will be used as the date of sales).  Such documentation would accompany any product for which warranty service is required.  You may register the products by determining the serial numbers of the Raymarine products installed onboard and then, use the Register Raymarine Product Online feature within the My Account web page associated your Raymarine web site login account.

Should you have a Navionics chart card featuring RYM within its product ID, then it cannot be registered.  However, should your Navionics Chart card not have RYM within its product ID, then it would have been separately purchased from and authorized Navionics dealer and should be registered via the Navionics web site after having created a login ID on that web site.  Your Navionics chart card will need to be connected to your computer to perform such registration.

That's a lot to work on. Thanks for the help. I'll be back in touch.

You're welcome.

My Navionics chip has the RYM so it is not eligible for registration.
The broker is looking up the original sale date for my electronics. He said he could send a letter as proof of sale for me to use to register the unit(s) in my name.
Also how do I find the version of the Navionics? (Gold,etc. and version number)

Bernie,

The current version of software that is installed within your MFD and any products whcih have been interfaced to the MFD via RayNet/SeaTalkhs/Ethernet communications protocol or SeaTalkng/NMEA 2000 communications protocol may be determined via the list returned from the command sequence HOME->SET-UP->MAINTENANANCE->DIAGONSTICS->SELECT DEVICE.  Before executing this command, ensure that all systems, including your engines have been powered ON.  Should the MFD have been updated with the latest a/c/e/gS-Series MFD software update, then it will populate the chart card with a file titled config.xml.  Should your MFD not have been updated with the latest a/c/e/gS-Series MFD software update, then it should be updated accordingly.  The config.xml file will contain information concerning the date of cartography:

ex. <dataAge>2013-02-23</dataAge>

Any documentation received regarding the product purchase should be retained and a copy submitted in conjunction with any future repairs that may fall within warranty coverage.  

Reply to Discussion

RSS

Events

Videos

  • Add Videos
  • View All

Photos

  • Add Photos
  • View All

Latest Activity

Donald Evans replied to Bruce Bayne's discussion Wiring a RayStar 125 to NMEA 0183
"Regarding the NMEA side of an RS125, as it can transmit NMEA data when correctly wired, does this also mean you can wire a standard NMEA GPS receiver to the same point?"
Oct 13
Mark Van Thillo replied to Tim Sheesley's discussion RD418HD parts needed parts diagram?
"Hello, I need to replace the insides of my radar RD418HD and don't need to replace the cover. is their a part number for this? Thank you for your help. Mark"
Oct 9
Jim Pra liked Jon Fitch's discussion Waypoint/route upload to new e series MFD
Oct 4
Joseph J. Job liked Joseph J. Job's profile
Oct 1
Donald Evans replied to Scott A Crego's discussion NMEA0183 (R08004) for my A65
"llllll"
Sep 23
Donald Evans replied to Scott A Crego's discussion NMEA0183 (R08004) for my A65
"Replacement NMEA cables are to be found here: http://www.gps-galore.co.uk/?product_cat=nmea-0183-cable What happened? did someone scrub the link off? There are so many people out there that can't afford to buy new plotters. Please leave it on…"
Sep 23
Donald Evans replied to Scott A Crego's discussion NMEA0183 (R08004) for my A65
Sep 23
James Riley updated their profile
Sep 16
Stephen Gwyn replied to John M Busciglio's discussion ST1000+ ST2000+ Autopilot PARTS needed
"I had the same problem with the ram tube spinning. I opened up the case to find circular bits of plastic at the bottom of the case. I made a bushing to fit between 4. the lead screw drive pulley and 7 the gear box support plate out some food…"
Sep 14
walt hoover replied to walt hoover's discussion autopilots
"I'm now installing the autopilot type 2 pump. When connecting into the steering system can I just tee into the three hydraulic lines or is there a different circut setup. My instruction sheet has me a bit stumped because it shows the pump…"
Sep 10
David Lane updated their profile
Aug 29
dave abrams replied to Erik Hillenmeyer's discussion NMEA GPS to DSC VHF connection
"My set up is all raymarine, S6002 autopilot and an A70 display.  how can I connect my dsc vhf to pick up the gps signal?  hopefully I can do this on the pedistile and not have to run wires back to th computer.  plas keep it simple if…"
Aug 18
Gregory S******* updated their profile
Aug 10
Folkmeister replied to Mikael H's discussion Show vessels name from AIS
"Reactivating this old thread -   My prior boat had an e7 and AIS650 which worked great, vessel names were displayed with target info.  My new boat has older e80 and e120 plotters.  We have just installed AIS, but the vast majority of…"
Aug 10
Carol Shores updated their profile
Aug 8
Jorge Chubretovich updated their profile
Aug 3

© 2018   Created by Moderator - Raymarine, US.   Powered by

Badges  |  Report an Issue  |  Terms of Service