I purchased a previously owned boat with all raymarine electronics on it. 2014 SeaHunt Gamefish 25. How can I register everything in my name? E97 with built in sounder with auto pilot, VHF, Sirius weather receiver and Navionics. Any advice on registering the Navionics will be appreciated too.

Views: 56

Reply to This

Replies to This Discussion

Welcome to the Raymarine Technical Forum Bernie,

For warranty purposes, you will need to have the prior owner provide you sales documentation for the Raymarine equipment.  In lieu of this documentation the production date (found within the serial number of each product will be used as the date of sales).  Such documentation would accompany any product for which warranty service is required.  You may register the products by determining the serial numbers of the Raymarine products installed onboard and then, use the Register Raymarine Product Online feature within the My Account web page associated your Raymarine web site login account.

Should you have a Navionics chart card featuring RYM within its product ID, then it cannot be registered.  However, should your Navionics Chart card not have RYM within its product ID, then it would have been separately purchased from and authorized Navionics dealer and should be registered via the Navionics web site after having created a login ID on that web site.  Your Navionics chart card will need to be connected to your computer to perform such registration.

That's a lot to work on. Thanks for the help. I'll be back in touch.

You're welcome.

My Navionics chip has the RYM so it is not eligible for registration.
The broker is looking up the original sale date for my electronics. He said he could send a letter as proof of sale for me to use to register the unit(s) in my name.
Also how do I find the version of the Navionics? (Gold,etc. and version number)

Bernie,

The current version of software that is installed within your MFD and any products whcih have been interfaced to the MFD via RayNet/SeaTalkhs/Ethernet communications protocol or SeaTalkng/NMEA 2000 communications protocol may be determined via the list returned from the command sequence HOME->SET-UP->MAINTENANANCE->DIAGONSTICS->SELECT DEVICE.  Before executing this command, ensure that all systems, including your engines have been powered ON.  Should the MFD have been updated with the latest a/c/e/gS-Series MFD software update, then it will populate the chart card with a file titled config.xml.  Should your MFD not have been updated with the latest a/c/e/gS-Series MFD software update, then it should be updated accordingly.  The config.xml file will contain information concerning the date of cartography:

ex. <dataAge>2013-02-23</dataAge>

Any documentation received regarding the product purchase should be retained and a copy submitted in conjunction with any future repairs that may fall within warranty coverage.  

Reply to Discussion

RSS

Events

Videos

  • Add Videos
  • View All

Photos

Loading…
  • Add Photos
  • View All

Latest Activity

Donald Evans replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"Seems you still don't understand what Cheng is saying."
2 hours ago
M.Catarall replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"Evermore ( Mrs Ariel Cheng ) answered me Today: Hello Lorenzo, Red wire: VCC power (+12V) Green wire: Tx, Output signal White wire: Rx, imput signal Black wire: Ground Gray wire: Shield wire, signal ground Blue wire: Not used I did not think anyone…"
11 hours ago
Donald Evans replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"You're still wrong. Evermore white wire is not the NMEA data out. And don't call me stupid. Get your facts right before commenting."
12 hours ago
M.Catarall replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"The information was not wrong when posted. I suggest you look at the date of the post before adding stupid comments"
17 hours ago
Donald Evans replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"Hahahahaha, you're all totally wrong. Should have bought it from www.gps-galore.co.uk The guy's an expert on these."
yesterday
Brian Kidwell updated their profile
Friday
Ricky Ladd replied to Joel Hjelseth's discussion Raymarine Dragonfly 7 malfunction
"I just installed my new Dragonfly 7 pro when I power it up the Dragonfly emblem comes up it then blinks goes to a blank screen with a blinking in the upper left hand corner then it goes back to the Raymarine emblem sometimes it goes to the accept…"
Aug 8
F John Draeger replied to F John Draeger's discussion Wind transducer data to Corepak 150 autopilot computer with Seatalk to Seatalk ng converter in network
"I am not getting speed information from my Airmar 2039901 transducer to my St50 plus. The reading is 0.0 kn and the transducer is clean. I have checked the connection and it is mechanically good. I have an i50 speed on the mast and I don't get…"
Jul 25
Pablo Luchetti updated their profile
Jul 24
Sophocles Hadjiosif replied to Greg B's discussion Can the P70R be used on a sailboat?
"If you can't auto tack with the p70r then what is the reason that some sailboats elect to install it? Can you program another soft button for tacking?"
Jul 23
David Harwood replied to David Harwood's discussion i50 technical info
"After a multi-year refit, my boat launched last August.  I am now attempting installation of the i50 TriData instrument in stand-alone mode (no network). Connections: 8 discreet connections on lower back of instrument. 1-3 for depth, 4-8 for…"
Jul 22
Gordon Scriba updated their profile
Jul 22
elvira replied to David Poeltl's discussion p70 installation problem
"I have a similar problem.  I have a smartpilot x30 and control head  I have the nmea 0183 connected to my garmin 7000 chartplotter  I receive the fluxgate compass data in my chartplotter, but not the data from my chartplotter in the…"
Jul 15
ALAN IZZARD updated their profile
Jul 12
Luis replied to John Pecora's discussion DSM300 Made in Mexico
"Hello, I have DSM30 bought in 2010. The bar code shows E63074 and on the bottom line */AE63074 1200513* It is connected to a CW90 chart plotter though a hub switch that also connects the radar to the chartplotter. Since the beginning it has an…"
Jul 11
Don Bruce replied to Ray Pantlik's discussion File conversion from .fsh to gpx and gpx to fsh
"Voyage planner is the worst software I have ever had the misfortune to need. I am still looking for a way to convert GPX to FSH files that would preclude me from having to use Voyage planner. GPSutility is good but they want $60 to get the full…"
Jul 10

© 2017   Created by Moderator - Raymarine, US.   Powered by

Badges  |  Report an Issue  |  Terms of Service