e120 resolution interface via VGA
Question:    
I am trying to mirror the e120 on my Samsung HD flat screen. The TV says mode not supported when I cable directly VGA-VGA. Samsung says your VGA signal is not compatible with theirs. So, just for the record what resolution does my e120 send on VGA. I have tried a PC 'monitor', it works fine; same cable. Also tried a VGA - HDMI converter, same message. There any number of 'active converters" for VGA-HDMI; is this the answer?

Views: 1286

Reply to This

Replies to This Discussion

I have a trouble with a Gs95 HDMI output, Is the format the same: 720P ?

Moderator - Raymarine, US said:

Welcome to the Raymarine Technical Forum Cliff,

The E-Series Classic MFDs VGA signal output specifications are as follows:

  • E120: 800x600 @56Hz
  • E80: 640x480 @60Hz

When seeking a TV or monitor to interface to an E-Series MFD, one should select a TV having support for the VGA signal characteristics of the MFD being interfaced to the TV.  One would typically find VGA support in high end TVs such as plasma units.  That said, no specific TV models can be recommended as the market for such product is continuously changing.  Customers are advised that when in doubt, consult with the TV manufacturer regarding which TV products feature support for the MFD's VGA signal characteristics.  The most challenging product to interface is the E120 which features a relatively uncommon 56Hz refresh rate.  We recently had one customer comment favorably on a VGA scaler which worked well in conjunction with his E120.  To view the web page for this VGA scaler, click here.  According to the customer, the scaler converted the E-120's VGA signal to a composite signal that was deemed of good quality.  Please bear in mind that Raymarine has neither tested this VGA scaler, nor does it recommend any specific scaling products for use with its MFDs.

Reply to Discussion

RSS

Events

Videos

  • Add Videos
  • View All

Photos

  • Add Photos
  • View All

Latest Activity

Chuck Rich updated their profile
Feb 17
William Lakso updated their profile
Feb 16
Donald Evans commented on Donald Evans's album

NMEA cable

"These cables are available on ww.gps-galore.co.uk and ebay. Bought one myself. The connector is a slightly different shape on the outside but it fits perfectly."
Feb 8
Igor Stelli updated their profile
Feb 1
Gregor Popp updated their profile
Jan 30
Michael Carson replied to Will Ritch-Smith's discussion EV1 wheel jerking back and forth
"I am having the same problem and this is very frustrating. EV1 with ACU400 p70 and rudder position sensor.  Vessel is a 53' sailboat. Displacement is approx 55,000lbs. Steering system is a Whitlock Mamba and the drive unit is a Robertson…"
Jan 27
Rogelio Finoli replied to Andrew Sonis's discussion "no compass" alarm on ST70
"Hi, I´m having problems with, apparently; the compass. I did the tests you suggested and my readings were 6 and 6.1 instead of 4 ohms, and 9.6 or so instead of 8 ohms, all the rest open as you mentioned. May I assume that the compass is…"
Jan 22
Eric West updated their profile
Jan 15
Mark Chapman updated their profile
Jan 12
aaron sherman updated their profile
Jan 10
Craig T. Olsen updated their profile
Dec 31, 2017
David Lane replied to Tiago Menezes's discussion Night mode
"Good day and happy new year to this forum group.   Question: When can we expect Raymarine to ad a night color palette to its line of MFDs?  It’s been talked about in this forum for at least 3 years.   I am 100% satisfied with…"
Dec 31, 2017
Bob Atkins replied to Bob Atkins's discussion Current C-MAP NT+ and NT chart chips do NOT work properly on RL70C
"Hi Thomas, Please read the moderator's instructions on April 8, 2013 and my posting on October 31, 2013 on page 1 of this discussion. The issue has to do with the Plotter Mode setting. The Plotter Mode must be OFF for all…"
Dec 30, 2017
THOMAS A RICH replied to Bob Atkins's discussion Current C-MAP NT+ and NT chart chips do NOT work properly on RL70C
"Good Morning, I also have a Rl80 with the old chip and has worked perfect without any updates except last month it performed exactly as you described.  The maps I have always used now say no Data.  I was going to buy a new chip, but not…"
Dec 30, 2017
Northlightinvest replied to Ben Campbell's discussion Wheelpilot Broken Part
"Dear raymarine team! Please, give information, that where can I order this part from Hungary. 3001-984-B Thanks!"
Dec 27, 2017
Russ Colombo left a comment for lee christiansen
"Lee: Guilty as charged, now gleeful denizen of Marco Island and still sailing.  How good of you to contact, and what news??? "
Dec 14, 2017

© 2018   Created by Moderator - Raymarine, US.   Powered by

Badges  |  Report an Issue  |  Terms of Service