I have a C120 Classic with DSM 30,,I have the B60 thru Hull transducer what setting do I use under Transducer configurations,its temp and sonar only

I have a C120 Classic with DSM 30,,I have the B60 thru Hull transducer what setting do I use under Transducer configurations,its temp and sonar only

Under Transducer configurations on the unit it has these,witch one should I Select

B256/M256

B260/M260/SS560

R99/R199

Views: 334

Reply to This

Replies to This Discussion

Welcome to the Raymarine Technical Forum Dennis,

Your DSM in not presenting the correct transducer list.  The list presented is that for 1kW rather than 600W transducers.  It is recommended that the DSM be reset (MENU->FISHFINDER SETTINGS->DSM RESET) to permit the list of 600W transducers to be displayed.  Should the problem persist thereafter, then please respond with all information printed on the tag affixed to the plug end of the transducer's cable.

OK,I reset the DSM it is now showing.witch set of numbers do I use,

P65/P66

P79

P319/B117/SS555

B66V/B66VL

B744V/B744VL/SS544V

B45

Thank you

Dennis,

Now the DSM is providing 600W transducer options.  The P319/B117/SS555 transducer. 

I have a DSM 30 and just installed a B60.  I was using a P79 before.  Selecting the setting above does not work for me.  Is the above information correct?

Reply to Discussion

RSS

Events

Videos

  • Add Videos
  • View All

Photos

  • Add Photos
  • View All

Latest Activity

J&G Marine supply replied to Don Gulliver's discussion AIS recommissioning
"Where on the web is the procedure to reset the mmsi.  Iknow pro ais to program but how do you clear the old mmsi"
yesterday
Richard Gard liked Tom MacAllister's discussion E80 Issues
yesterday
Richard Gard liked Miguel Gonzalez del Rey's discussion E120 -E80
yesterday
Richard Gard replied to Adam Hyde's discussion New C125 won't display NMEA 0183 depth data
"subscribed"
yesterday
Richard Gard liked Adam Hyde's discussion New C125 won't display NMEA 0183 depth data
yesterday
TJ replied to Gerhard Lang's discussion CompactFlash card for E120/E80 classic series, data exchange waypoints and routes
"FAT 32 or 16 the compatibility tool is gone now."
Saturday
Tim Turner replied to Tim Turner's discussion ST60+ Wind
"will that transducer work with a st50?"
Jul 2
Jan-Erik replied to Jan-Erik's discussion New boat with all Raymarine electronics
Jun 29
Tony O replied to Brad's discussion Rejoining cut Raynet cable for radar
"My radar  stopped working and I found a small Nick in my cable. Seeing that I could not get access to the place where the cable was run, I decided to open the cable to see how many wires were cut. Luckily there was only one so I Soldered them…"
Jun 25
Jindrich Dokonal replied to Robert Dahn's discussion ST70 Plus Power Cable
"Hi, How can I purchase a power cable for my ST70+plus display? Best regards, Henry"
Jun 25
Tom replied to Tom's discussion Pink "jelly fish" like icon meaning on chart
"I returned and got a picture. What does it mean?https://i.imgur.com/Du4JdEL.jpg"
Jun 19
Lasse Åhlander updated their profile
Jun 16
Russell Herbert updated their profile
Jun 14
Jim Donald updated their profile
Jun 13
marcelo wainer replied to marcelo wainer's discussion Smart Pilot x-5
"Hello. I have a Smart Pilot X-5 and when is in AUTO its change the course always to port side and in 2 minuters its lost the way. I made the seatrial and recalibrate the compass but the problem persists. What can I do.?Thank you very much."
Jun 11
Michael Pappert updated their profile
Jun 3

© 2018   Created by Moderator - Raymarine, US.   Powered by

Badges  |  Report an Issue  |  Terms of Service