C80 GPS data stream
I am having difficulty with GPS information loading very slow and no data alarm going off frequently. Can anyone direct me to the cause and solution? Any help is appreciated. ThanksSee More
E120 Wide Vessel Display
I have an E120 Wide running 2D mode with heads up display. My vessel is set to the Large Power Boat Setting. It shows my vessel tracking sideways on the screen. How do I fix this. It shows the right heading but my vessel is traveling sideways. Does anybody know how to fix this?
Replies to This Discussion
-
Permalink Reply by Moderator - Raymarine, US on -
Welcome to the Raymarine Technical Forum Stacy,
Please click here to view the Forum discussion where I had previously addressed this subject.
Members
Events
Videos
-
IMG_0899
Added by Lucian Ploias 0 Comments 0 Likes
Photos
Latest Activity
Ilson Soares posted a discussionAutohelm 3000
I have a very old Autohelm 3000. It has been working fine for a long time, but recently I observed it cannot keep course. Motor is working fine, correcting any change of direction, but even in a fixed course, motor keeps turning for time to time in the same direction. Any idea?Is it possible to obtain its eletronic circuit with list of components?Kind RegardsSee More
Moderator - Raymarine, US replied to Robert Scherman's discussion Raychart 620"Robert,
This issue would not be caused by, nor would it be solved by a software update."
Steve Merle replied to Steve Merle's discussion SR100 Antenna Connection"Hi
Thanks for the reply, but you misunderstand. I'm looking for the part that the antenna cable attaches to on the SR100. It's missing. There is no connector on the unit and no wires going inside. There is just an open round circle…"
Robert Scherman replied to Robert Scherman's discussion Raychart 620"
The equipment worked fine last season - could this need a software update?
"
Rodrigo replied to Rodrigo's discussion mercruiser gateway issues"thanks,
the number of engines is 2, I selected that on the menu of the display,,, where do I get one of those Can bus analizer tool?"
Jason Hite replied to Jason Hite's discussion e7d looking to add depth/speed/temp sensor"Thank you! "
mmmmmmmm posted a discussionVoyage Planner updates planned ?
Hi,I've been trying to use VP (1.0.0.49) and have found it to be very clunky to say the least, are there any imminent updates planned for this software ?BooSee More
Trina Clark posted a discussionhelp with the right adapter cable for the p79 airmar to the Raymarine e7d MFD
I need to know what adaptor cable I can purchase (Page 46 of the E7D manual), to connect my Airmar p79 transducer directly to my Raymarine E7D MFD. I have an i70 but I really don't want to spend more money on more Raymarine equipment (as I just saw on your site)SeaTalkngThe transducers above are also compatible with ST70,…See More
Moderator - Raymarine, US replied to Rick Palyok's discussion SR50 Sirius Receiver Compatibility with C- Series Chart Plotter"Welcome to the Raymarine Technical Forum Rick,
The SR50 is exclusively compatible with the A-Series MFDs (A50, A50D, A57D, A70, A70D) and C-Series Classic MFDs (C70, C80, C120). The SR50 may also be interfaced to an a/c/e-Series MFD (a65, a67,…"
Moderator - Raymarine, US replied to Steve Merle's discussion SR100 Antenna Connection"Welcome to the Raymarine Technical Forum Steve,
The SR100, SR6, SR50, and SR150 are each designed for use with the E03010 SRA40 Sirius Weather Antenna and E03011 Sirius Antenna Cable. Raymarine parts may be ordered from an authorized Raymarine…"
Neil curtis posted a discussionE7 output 0183 to autopilot for routes
How do you set the e7 to send waypoint or routes to a third party autopilot
Moderator - Raymarine, US replied to Roger Ruby's discussion SR50 SeaTalk NG Network Y Cable"Joel,
The SR50 should only be used in a/c/e-Series MFDs (a65, a67, c95, c97, c125, c127, e7, e7D, e95, e97, e125, e127, e165) installations which do not feature any SeaTalkng devices other than the a/c/e-Series MFD and SR50 and do not require use of…"
Mike Gengler posted a discussionConnecting e7D MFD to Si-Tex SP-70 Autopilot
Looking to see if anyone can recommend to me a location/product link I can purchase an NMEA 0183 cable to integrate my Si-Tex SP 70 Autopilot to my new e7D MFD. My auotpilot processor takes NMEA 0183 I/O, as does the e7D, but lookign for a specific cable that would be recommended to purchase. Any ideas?Thanks,See More
Moderator - Raymarine, US replied to Bryan's discussion Connecting a C120w to a Sr 50"Welcome to the Raymarine Technical Forum,
The SR50 cannot be interfaced to a C-Series Widescreen MFD (C90W, C120W, C140W). In order to utilize the MFD's Sirius Marine Weather/Radio features, the MFD would need to be interfaced to one of…"
© 2013 Created by Moderator - Raymarine, US.
Powered by
