I have recently sold my 2008 Targa 44 with IPS. The buyer hammered me on price and didnt want the Raymarine kit (he wants Garmin since that what new fairlines have) so I took it all off for the new boat.

My E series plotter, ST60's and ST6001 are all fine but I want to know if I can use my old course computer.

Looking at the installation manual here http://www.manualslib.com/manual/138214/Raymarine-Volvopenta-Ips-Au...

It seems the IPS was an S3G course computer with the attached IPS DPU box connected by sea-talk. Ive opened the course computer box up and all the connection seem to be as a standard S3G.

Is there any difference or is the IPS pack just an S3G and then the IPS DPU box? (I have a picture to add but admin have not authorized it yet)

My new boat has a Raymarine A/P but the CC is damaged so I hoped to substitue my old system as its newer and a better setup. The boat already has a Hydraulic pump, ruudder reference sensor and fluxgate installed.

Views: 217

Attachments:

Reply to This

Replies to This Discussion

The course computer does have different software when noted as a S3G IPS course computer. The software will need to be changed in order to use the course computer with a different drive system.  We do the software change at the Service Center for free you will just need to pay for shipping the unit to the below address.

Raymarine Service Center

9 Townsend West

Nashua, NH 03063

 

Include in the box:

Name

Daytime Phone

Return address

Brief description of the issue

Perfect thank you.

Anytime, let us know if you have any future questions.

Reply to Discussion

RSS

Events

Videos

  • Add Videos
  • View All

Photos

  • Add Photos
  • View All

Latest Activity

Donald Evans replied to Scott A Crego's discussion NMEA0183 (R08004) for my A65
"llllll"
15 hours ago
Donald Evans replied to Scott A Crego's discussion NMEA0183 (R08004) for my A65
"Replacement NMEA cables are to be found here: http://www.gps-galore.co.uk/?product_cat=nmea-0183-cable What happened? did someone scrub the link off? There are so many people out there that can't afford to buy new plotters. Please leave it on…"
16 hours ago
Donald Evans replied to Scott A Crego's discussion NMEA0183 (R08004) for my A65
17 hours ago
James Riley updated their profile
Sep 16
Stephen Gwyn replied to John M Busciglio's discussion ST1000+ ST2000+ Autopilot PARTS needed
"I had the same problem with the ram tube spinning. I opened up the case to find circular bits of plastic at the bottom of the case. I made a bushing to fit between 4. the lead screw drive pulley and 7 the gear box support plate out some food…"
Sep 14
walt hoover replied to walt hoover's discussion autopilots
"I'm now installing the autopilot type 2 pump. When connecting into the steering system can I just tee into the three hydraulic lines or is there a different circut setup. My instruction sheet has me a bit stumped because it shows the pump…"
Sep 10
David Lane updated their profile
Aug 29
dave abrams replied to Erik Hillenmeyer's discussion NMEA GPS to DSC VHF connection
"My set up is all raymarine, S6002 autopilot and an A70 display.  how can I connect my dsc vhf to pick up the gps signal?  hopefully I can do this on the pedistile and not have to run wires back to th computer.  plas keep it simple if…"
Aug 18
Gregory S******* updated their profile
Aug 10
Folkmeister replied to Mikael H's discussion Show vessels name from AIS
"Reactivating this old thread -   My prior boat had an e7 and AIS650 which worked great, vessel names were displayed with target info.  My new boat has older e80 and e120 plotters.  We have just installed AIS, but the vast majority of…"
Aug 10
Carol Shores updated their profile
Aug 8
Jorge Chubretovich updated their profile
Aug 3
J&G Marine supply replied to Don Gulliver's discussion AIS recommissioning
"Where on the web is the procedure to reset the mmsi.  Iknow pro ais to program but how do you clear the old mmsi"
Jul 17
Richard Gard liked Tom MacAllister's discussion E80 Issues
Jul 17
Richard Gard liked Miguel Gonzalez del Rey's discussion E120 -E80
Jul 17
Richard Gard replied to Adam Hyde's discussion New C125 won't display NMEA 0183 depth data
"subscribed"
Jul 17

© 2018   Created by Moderator - Raymarine, US.   Powered by

Badges  |  Report an Issue  |  Terms of Service