Hi,
I previously enjoyed having the knob feature on a ST8002 and I would've like to know if I can use a P70R with a x-10 corepack and type 1 mechanical linear drive on my 36 foot 15,000 pound sailboat?
Thanks,

Views: 213

Reply to This

Replies to This Discussion

Yes, the p70R will work the same as the ST8002 control unit on a sailboat. The main reason why the knob control heads are directly related to power boats is because you don't have the Wind mode options with the rotary knob control heads.

Re-awakening this thread, if possible. On page 33 of the "81355-1-EN p70 p70R Installation and operation instructions.pdf", it describes getting into Wind Vane mode by hitting Standby and Auto at the same time, and this appears to apply to both P70 and P70R. Is that true? I can see that the knob doesn't appear to provide an alternative to AutoTack and AutoTurn, but one can still enter Wind Vane mode on the P70R, no? 

You can only get into these wind vane modes using a p70. 

If you can't auto tack with the p70r then what is the reason that some sailboats elect to install it? Can you program another soft button for tacking?

Reply to Discussion

RSS

Events

Videos

  • Add Videos
  • View All

Photos

  • Add Photos
  • View All

Latest Activity

Sam updated their profile
Monday
captdanpatrick updated their profile
Sunday
Rick Fadler replied to Rick Fadler's discussion Adding Radar
"Thank you, this is really helpful!"
Sunday
Jan van der Loos replied to duco camphuijsen's discussion Ray49E error code
"Question regarding the RAY49E VHF. I'm rewiring the system. The NMEA output of the VHF, with the NMEA datasets DSC and DSE. How are they processed further in the system? It will be linked with a MFD C127.  Thanks in advance. "
Nov 13
Keith M Rodger updated their profile
Nov 7
Brad Young updated their profile
Oct 31
Jim Pra replied to Neil McCubbin's discussion Where to find full manual for a TackTick mn 100-2 wind display
"This link is no longer active.  Is the guide available somewhere else? Thanks, Jim"
Oct 30
Michael Edwards updated their profile
Oct 30
Steve Yama replied to son nguyen's discussion Part No. for Auto pilot Pump M81120 Type 1 12V
"Did you ever find your seal?  My pump is starting to leak also between the pump and motor.  Not a lot but getting to be a nuisance."
Oct 17
Brent Meyer updated their profile
Sep 21
Robert Garrett liked Robert Garrett's profile
Sep 13
James Coolbaugh replied to Michael McDonald's discussion Integrating ST60+ instruments to eS78 Chartplotter via Seatalk Conversion Kit
"Greetings, Thia may be a bit late,but I'll try. I just installed the eS78 MFD with the Quantum (wireless) radar, which I want to use with my existing ST60 series instruments. With my old radar, they interfaced fine, but with the new…"
Sep 8
martin schulman replied to martin schulman's discussion nmea connector- C 80 chartplotter to VHF
"I can give you very little help here. After jerking around with the connection for months I finally decided to skip it. The Standard Horizon, which works beautifully despite the small screen is below and required leaving the helm to read.  I…"
Sep 4
Peter Stewart replied to martin schulman's discussion nmea connector- C 80 chartplotter to VHF
"I am purchasing a Standard Horizon gx2200 vhf with GPS and AIS. I currently have a C80 MFD. On the back of the mfd the NMEA IN/OUT connection is available. Using a RO8004 cable with the appropriate connection on one end can I join up the C80 at the…"
Sep 4
COUCHSAILORS.com updated their profile
Aug 24
COUCHSAILORS.com replied to Steve C's discussion ST60+ Tridata Not Calibrating to SOG
"When I press reset to accept the SOG which I am seeing it beeps but still shows 0.0 and doesn't transfer the SOG to the speed. Please advise."
Aug 24

© 2017   Created by Moderator - Raymarine, US.   Powered by

Badges  |  Report an Issue  |  Terms of Service