Mike Parker's Discussions (41)

Discussions Replied To (40) Replies Latest Activity

"Gregg, It sounds like you are describing the security screw packaged with Navpod bra…"

Mike Parker replied Oct 19, 2015 to C80 special access screw heads

5 Oct 21, 2015
Reply by Moderator - Raymarine, US

"Conorad, I do not work for Raymarine.  I am a Certified Raymarine Installer.  I will…"

Mike Parker replied Jul 9, 2015 to eS78 Chart Display with pair of B75 transducers.

5 Jul 9, 2015
Reply by Mike Parker

"Conorad, Reviewing the Raymarine website, the only transducers which may be directly…"

Mike Parker replied Jul 8, 2015 to eS78 Chart Display with pair of B75 transducers.

5 Jul 9, 2015
Reply by Mike Parker

"Bob, Here are instructions for setting up the Evolution pilot with a p70 / p70R cont…"

Mike Parker replied May 21, 2015 to EV-200 failed seatrial calibration

37 Nov 17, 2015
Reply by Bad Marc - Raymarine.US

"Julian, Actisense make a version of the NGW-1 specifically set up to handle AIS conv…"

Mike Parker replied Apr 12, 2015 to AIS connection to a plotter

8 Apr 13, 2015
Reply by Moderator - Raymarine, US

"Diego, Go to www.airmartechnology.com. Search "ST800" and "P319" to download install…"

Mike Parker replied Apr 4, 2015 to Replacing B&G Transducers

2 Apr 14, 2015
Reply by Underway - Raymarine, US

"Bruce, Support of Navionics Auto Routing was added with release of v. 11 software. Y…"

Mike Parker replied Mar 14, 2015 to "New Go To Function" in v13.37

4 Mar 14, 2015
Reply by Moderator - Raymarine, US

"Henry, Although it is possible to connect working ST60 Depth, Speed and Wind transd…"

Mike Parker replied Mar 13, 2015 to hsb Switch Connections

9 Mar 20, 2015
Reply by Moderator - Raymarine, US

"This might do the job for you. http://www.oceanequipment.com/powerpod-pp4100-series/"

Mike Parker replied Feb 3, 2015 to Autopilot question

17 Feb 3, 2015
Reply by Underway - Raymarine, US

"Two suggestions: Make sure there is no fouling on the hull near the speed transduce…"

Mike Parker replied Jan 6, 2015 to Tridata speed/temp transducer question

6 Jan 9, 2015
Reply by Underway - Raymarine, US

RSS

Events

Videos

  • Add Videos
  • View All

Photos

  • Add Photos
  • View All

Latest Activity

Donald Evans replied to Scott A Crego's discussion NMEA0183 (R08004) for my A65
"llllll"
15 hours ago
Donald Evans replied to Scott A Crego's discussion NMEA0183 (R08004) for my A65
"Replacement NMEA cables are to be found here: http://www.gps-galore.co.uk/?product_cat=nmea-0183-cable What happened? did someone scrub the link off? There are so many people out there that can't afford to buy new plotters. Please leave it on…"
16 hours ago
Donald Evans replied to Scott A Crego's discussion NMEA0183 (R08004) for my A65
17 hours ago
James Riley updated their profile
Sep 16
Stephen Gwyn replied to John M Busciglio's discussion ST1000+ ST2000+ Autopilot PARTS needed
"I had the same problem with the ram tube spinning. I opened up the case to find circular bits of plastic at the bottom of the case. I made a bushing to fit between 4. the lead screw drive pulley and 7 the gear box support plate out some food…"
Sep 14
walt hoover replied to walt hoover's discussion autopilots
"I'm now installing the autopilot type 2 pump. When connecting into the steering system can I just tee into the three hydraulic lines or is there a different circut setup. My instruction sheet has me a bit stumped because it shows the pump…"
Sep 10
David Lane updated their profile
Aug 29
dave abrams replied to Erik Hillenmeyer's discussion NMEA GPS to DSC VHF connection
"My set up is all raymarine, S6002 autopilot and an A70 display.  how can I connect my dsc vhf to pick up the gps signal?  hopefully I can do this on the pedistile and not have to run wires back to th computer.  plas keep it simple if…"
Aug 18
Gregory S******* updated their profile
Aug 10
Folkmeister replied to Mikael H's discussion Show vessels name from AIS
"Reactivating this old thread -   My prior boat had an e7 and AIS650 which worked great, vessel names were displayed with target info.  My new boat has older e80 and e120 plotters.  We have just installed AIS, but the vast majority of…"
Aug 10
Carol Shores updated their profile
Aug 8
Jorge Chubretovich updated their profile
Aug 3
J&G Marine supply replied to Don Gulliver's discussion AIS recommissioning
"Where on the web is the procedure to reset the mmsi.  Iknow pro ais to program but how do you clear the old mmsi"
Jul 17
Richard Gard liked Tom MacAllister's discussion E80 Issues
Jul 17
Richard Gard liked Miguel Gonzalez del Rey's discussion E120 -E80
Jul 17
Richard Gard replied to Adam Hyde's discussion New C125 won't display NMEA 0183 depth data
"subscribed"
Jul 17

© 2018   Created by Moderator - Raymarine, US.   Powered by

Badges  |  Report an Issue  |  Terms of Service