Underway - Raymarine, US's Discussions (9,234)

Discussions Replied To (9228) Replies Latest Activity

"So when you press Auto, while underway, the Tiller drive just goes hardover right aw…"

Underway - Raymarine, US replied Feb 22, 2016 to P70R Auto Pilot Commissioning Problem

11 Feb 23, 2016
Reply by Moderator - Raymarine, US

"Yes, correct the Seatalk to Seatalk NG converter kit E22158. The rudder reference se…"

Underway - Raymarine, US replied Feb 17, 2016 to Replacement for Raymarine 400G AST

5 Feb 17, 2016
Reply by Underway - Raymarine, US

"Yes, you would need the Seatalk to Seatalk NG converter to communicate with the olde…"

Underway - Raymarine, US replied Feb 16, 2016 to Replacement for Raymarine 400G AST

5 Feb 17, 2016
Reply by Underway - Raymarine, US

"Anytime, let us know if you have any future questions."

Underway - Raymarine, US replied Feb 16, 2016 to Difference between S3G and S3G IPS

3 Feb 16, 2016
Reply by Underway - Raymarine, US

"Good to hear you are up and running!  I will make sure your update request for the i…"

Underway - Raymarine, US replied Feb 16, 2016 to P70R Auto Pilot Commissioning Problem

11 Feb 23, 2016
Reply by Moderator - Raymarine, US

"That is correct."

Underway - Raymarine, US replied Feb 16, 2016 to adding S2 Course computer to new STng network

3 Feb 16, 2016
Reply by Underway - Raymarine, US

"Yes, that is a Smartpilot S1 course computer, the M81190 fluxgate compass will work…"

Underway - Raymarine, US replied Feb 16, 2016 to Compatible fluxgate for ST6001?

3 Feb 16, 2016
Reply by Underway - Raymarine, US

"Anytime, contact us with further questions."

Underway - Raymarine, US replied Feb 16, 2016 to Change source of heading for S3 Autopilot?

3 Feb 16, 2016
Reply by Underway - Raymarine, US

"Mounting above decks isn't recommended but, we do have installations where it is nee…"

Underway - Raymarine, US replied Feb 12, 2016 to Rudder Reference for Transom-Hung Rudder

1 Feb 12, 2016
Reply by Underway - Raymarine, US

"Actually the ST800-p120 has both Speed and Temperature wires, the Brown and White ar…"

Underway - Raymarine, US replied Feb 12, 2016 to Transducer Connection for Autohelm ST30 Bidata

1 Feb 12, 2016
Reply by Underway - Raymarine, US

RSS

Events

Videos

  • Add Videos
  • View All

Photos

  • Add Photos
  • View All

Latest Activity

Steve Yama replied to son nguyen's discussion Part No. for Auto pilot Pump M81120 Type 1 12V
"Did you ever find your seal?  My pump is starting to leak also between the pump and motor.  Not a lot but getting to be a nuisance."
Tuesday
Brent Meyer updated their profile
Sep 21
Robert Garrett liked Robert Garrett's profile
Sep 13
James Coolbaugh replied to Michael McDonald's discussion Integrating ST60+ instruments to eS78 Chartplotter via Seatalk Conversion Kit
"Greetings, Thia may be a bit late,but I'll try. I just installed the eS78 MFD with the Quantum (wireless) radar, which I want to use with my existing ST60 series instruments. With my old radar, they interfaced fine, but with the new…"
Sep 8
martin schulman replied to martin schulman's discussion nmea connector- C 80 chartplotter to VHF
"I can give you very little help here. After jerking around with the connection for months I finally decided to skip it. The Standard Horizon, which works beautifully despite the small screen is below and required leaving the helm to read.  I…"
Sep 4
Peter Stewart replied to martin schulman's discussion nmea connector- C 80 chartplotter to VHF
"I am purchasing a Standard Horizon gx2200 vhf with GPS and AIS. I currently have a C80 MFD. On the back of the mfd the NMEA IN/OUT connection is available. Using a RO8004 cable with the appropriate connection on one end can I join up the C80 at the…"
Sep 4
COUCHSAILORS.com updated their profile
Aug 24
COUCHSAILORS.com replied to Steve C's discussion ST60+ Tridata Not Calibrating to SOG
"When I press reset to accept the SOG which I am seeing it beeps but still shows 0.0 and doesn't transfer the SOG to the speed. Please advise."
Aug 24
Tom Arnold updated their profile
Aug 22
Donald Evans replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"All I can say is try getting your position by using the white wire! I know Ariel Cheng, she is just a temp. She doesn't know how to distinguish one wire from another. I used to deal with Evermore and found their receivers to be poor, thin wires…"
Aug 21
M.Catarall replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"You say Correct it is White wire: Rx, imput signal not data out but data in as shown on reply from Evermore"
Aug 21
Donald Evans replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"Seems you still don't understand what Cheng is saying."
Aug 21
M.Catarall replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"Evermore ( Mrs Ariel Cheng ) answered me Today: Hello Lorenzo, Red wire: VCC power (+12V) Green wire: Tx, Output signal White wire: Rx, imput signal Black wire: Ground Gray wire: Shield wire, signal ground Blue wire: Not used I did not think anyone…"
Aug 20
Donald Evans replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"You're still wrong. Evermore white wire is not the NMEA data out. And don't call me stupid. Get your facts right before commenting."
Aug 20
M.Catarall replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"The information was not wrong when posted. I suggest you look at the date of the post before adding stupid comments"
Aug 20
Donald Evans replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"Hahahahaha, you're all totally wrong. Should have bought it from www.gps-galore.co.uk The guy's an expert on these."
Aug 20

© 2017   Created by Moderator - Raymarine, US.   Powered by

Badges  |  Report an Issue  |  Terms of Service