FLOB - Raymarine, US's Discussions (780)

Discussions Replied To (780) Replies Latest Activity

"Dave,  I apologize for your frustration. I am well aware of your issue. In June of 2…"

FLOB - Raymarine, US replied Jan 29, 2016 to very confused on the EV100

3 Feb 1, 2016
Reply by Underway - Raymarine, US

"You could tie the 2 together and see if they repeat to each other. If they do than t…"

FLOB - Raymarine, US replied Aug 19, 2014 to Raydata M78879 Software Rev.- 4.0 Compatibility with newer systems?

3 Aug 19, 2014
Reply by FLOB - Raymarine, US

"ST40s do not have the capability of calibrating water temp."

FLOB - Raymarine, US replied Aug 19, 2014 to ST40 Temperature Calibration

4 Aug 20, 2014
Reply by Rick Hamill

"Older electronics starting to get tired. I would assume there is in an internal comp…"

FLOB - Raymarine, US replied Aug 18, 2014 to ST 7000

3 Aug 18, 2014
Reply by FLOB - Raymarine, US

"Yes the drive FETs have failed you can send it in. See below: Return your Raymarine…"

FLOB - Raymarine, US replied Aug 18, 2014 to drive stopped

1 Aug 18, 2014
Reply by FLOB - Raymarine, US

"No you need to create a Seatalk NG network see below: "

FLOB - Raymarine, US replied Aug 18, 2014 to P70/P70R cabling

2 Aug 18, 2014
Reply by Charles A Webb

"There is a gray box that the ST8002 connects to this your course computer. It sounds…"

FLOB - Raymarine, US replied Aug 18, 2014 to auto pilot doesn't read course heading correctly.

5 Aug 25, 2014
Reply by Underway - Raymarine, US

"The ST6002 is compatible, so is the ST7002 and ST8002."

FLOB - Raymarine, US replied Aug 18, 2014 to Autohelm ST6000+

3 Aug 18, 2014
Reply by FLOB - Raymarine, US

"Garmin grey to SPX +in and Garmin common ground to SPX -in"

FLOB - Raymarine, US replied Aug 18, 2014 to Connect Garmin 541s to Wheelpilot X-5

1 Aug 18, 2014
Reply by FLOB - Raymarine, US

"A spur cable can be no longer than 6M"

FLOB - Raymarine, US replied Aug 18, 2014 to SPX-5R P70 Wheel Pilot Not powering up after a switched to a longer spar cable

6 Aug 25, 2014
Reply by Underway - Raymarine, US

RSS

Events

Videos

  • Add Videos
  • View All

Photos

Loading…
  • Add Photos
  • View All

Latest Activity

Donald Evans replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"Seems you still don't understand what Cheng is saying."
2 hours ago
M.Catarall replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"Evermore ( Mrs Ariel Cheng ) answered me Today: Hello Lorenzo, Red wire: VCC power (+12V) Green wire: Tx, Output signal White wire: Rx, imput signal Black wire: Ground Gray wire: Shield wire, signal ground Blue wire: Not used I did not think anyone…"
12 hours ago
Donald Evans replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"You're still wrong. Evermore white wire is not the NMEA data out. And don't call me stupid. Get your facts right before commenting."
12 hours ago
M.Catarall replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"The information was not wrong when posted. I suggest you look at the date of the post before adding stupid comments"
17 hours ago
Donald Evans replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"Hahahahaha, you're all totally wrong. Should have bought it from www.gps-galore.co.uk The guy's an expert on these."
yesterday
Brian Kidwell updated their profile
Friday
Ricky Ladd replied to Joel Hjelseth's discussion Raymarine Dragonfly 7 malfunction
"I just installed my new Dragonfly 7 pro when I power it up the Dragonfly emblem comes up it then blinks goes to a blank screen with a blinking in the upper left hand corner then it goes back to the Raymarine emblem sometimes it goes to the accept…"
Aug 8
F John Draeger replied to F John Draeger's discussion Wind transducer data to Corepak 150 autopilot computer with Seatalk to Seatalk ng converter in network
"I am not getting speed information from my Airmar 2039901 transducer to my St50 plus. The reading is 0.0 kn and the transducer is clean. I have checked the connection and it is mechanically good. I have an i50 speed on the mast and I don't get…"
Jul 25
Pablo Luchetti updated their profile
Jul 24
Sophocles Hadjiosif replied to Greg B's discussion Can the P70R be used on a sailboat?
"If you can't auto tack with the p70r then what is the reason that some sailboats elect to install it? Can you program another soft button for tacking?"
Jul 23
David Harwood replied to David Harwood's discussion i50 technical info
"After a multi-year refit, my boat launched last August.  I am now attempting installation of the i50 TriData instrument in stand-alone mode (no network). Connections: 8 discreet connections on lower back of instrument. 1-3 for depth, 4-8 for…"
Jul 22
Gordon Scriba updated their profile
Jul 22
elvira replied to David Poeltl's discussion p70 installation problem
"I have a similar problem.  I have a smartpilot x30 and control head  I have the nmea 0183 connected to my garmin 7000 chartplotter  I receive the fluxgate compass data in my chartplotter, but not the data from my chartplotter in the…"
Jul 15
ALAN IZZARD updated their profile
Jul 12
Luis replied to John Pecora's discussion DSM300 Made in Mexico
"Hello, I have DSM30 bought in 2010. The bar code shows E63074 and on the bottom line */AE63074 1200513* It is connected to a CW90 chart plotter though a hub switch that also connects the radar to the chartplotter. Since the beginning it has an…"
Jul 11
Don Bruce replied to Ray Pantlik's discussion File conversion from .fsh to gpx and gpx to fsh
"Voyage planner is the worst software I have ever had the misfortune to need. I am still looking for a way to convert GPX to FSH files that would preclude me from having to use Voyage planner. GPSutility is good but they want $60 to get the full…"
Jul 10

© 2017   Created by Moderator - Raymarine, US.   Powered by

Badges  |  Report an Issue  |  Terms of Service