Richard Bowders's Discussions (19)

Discussions Replied To (14) Replies Latest Activity

"Hi Glenn, Manufacturer: C-Map Model Number: Na-C303c-Card You might want to check eB…"

Richard Bowders replied Mar 12, 2014 to RL70C

2 Mar 12, 2014
Reply by Moderator - Raymarine, US

"Ah hah, that makes sense to me - actually nice to have the adaptor included!"

Richard Bowders replied Feb 21, 2014 to Dragon Fly

4 Feb 21, 2014
Reply by Moderator - Raymarine, US

"Hi, I'm curious as to where you purchased the unit with the cards as the cards suppl…"

Richard Bowders replied Feb 21, 2014 to Dragon Fly

4 Feb 21, 2014
Reply by Moderator - Raymarine, US

"OK, thank you!"

Richard Bowders replied Feb 20, 2014 to DSM300 Made in Mexico

19 Jul 11
Reply by Luis

"Hi, did the replacement program for the Made in Mexico DSM300 really just end at the…"

Richard Bowders replied Feb 20, 2014 to DSM300 Made in Mexico

19 Jul 11
Reply by Luis

"OK, thanks, NKO."

Richard Bowders replied Feb 4, 2014 to Anyone ever seen "bubbles in LCD display similar to this?

3 Feb 4, 2014
Reply by NKO, Raymarine, US

"Hi Graeme, I'm not an expert, however reading the installation manual as I am sure y…"

Richard Bowders replied Jan 21, 2014 to Installation issues for Dragonfly Model E70085-AUS

9 Jan 23, 2014
Reply by NKO, Raymarine, US

"hi, the idea is to have the least amount of turbulence around the transducer. While…"

Richard Bowders replied Jan 21, 2014 to Installation issues for Dragonfly Model E70085-AUS

9 Jan 23, 2014
Reply by NKO, Raymarine, US

"Great idea and nice job! My current workaround is this: I found a nice fitting stran…"

Richard Bowders replied Jan 19, 2014 to C70 Broken Fish Finder Plug Pin

9 Jan 20, 2014
Reply by NKO, Raymarine, US

"Many thanks! I just realized I am forgetting about the Raystar 125 GPS Receiver that…"

Richard Bowders replied Jan 15, 2014 to MARPA and Radar Overlay Question

5 Jan 15, 2014
Reply by NKO, Raymarine, US

RSS

Events

Videos

  • Add Videos
  • View All

Photos

Loading…
  • Add Photos
  • View All

Latest Activity

Tom Arnold updated their profile
yesterday
Donald Evans replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"All I can say is try getting your position by using the white wire! I know Ariel Cheng, she is just a temp. She doesn't know how to distinguish one wire from another. I used to deal with Evermore and found their receivers to be poor, thin wires…"
Monday
M.Catarall replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"You say Correct it is White wire: Rx, imput signal not data out but data in as shown on reply from Evermore"
Monday
Donald Evans replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"Seems you still don't understand what Cheng is saying."
Monday
M.Catarall replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"Evermore ( Mrs Ariel Cheng ) answered me Today: Hello Lorenzo, Red wire: VCC power (+12V) Green wire: Tx, Output signal White wire: Rx, imput signal Black wire: Ground Gray wire: Shield wire, signal ground Blue wire: Not used I did not think anyone…"
Sunday
Donald Evans replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"You're still wrong. Evermore white wire is not the NMEA data out. And don't call me stupid. Get your facts right before commenting."
Sunday
M.Catarall replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"The information was not wrong when posted. I suggest you look at the date of the post before adding stupid comments"
Sunday
Donald Evans replied to Lorenzo Vanni's discussion Raychart BC420 and Evermore SA-320
"Hahahahaha, you're all totally wrong. Should have bought it from www.gps-galore.co.uk The guy's an expert on these."
Sunday
Brian Kidwell updated their profile
Friday
Ricky Ladd replied to Joel Hjelseth's discussion Raymarine Dragonfly 7 malfunction
"I just installed my new Dragonfly 7 pro when I power it up the Dragonfly emblem comes up it then blinks goes to a blank screen with a blinking in the upper left hand corner then it goes back to the Raymarine emblem sometimes it goes to the accept…"
Aug 8
F John Draeger replied to F John Draeger's discussion Wind transducer data to Corepak 150 autopilot computer with Seatalk to Seatalk ng converter in network
"I am not getting speed information from my Airmar 2039901 transducer to my St50 plus. The reading is 0.0 kn and the transducer is clean. I have checked the connection and it is mechanically good. I have an i50 speed on the mast and I don't get…"
Jul 25
Pablo Luchetti updated their profile
Jul 24
Sophocles Hadjiosif replied to Greg B's discussion Can the P70R be used on a sailboat?
"If you can't auto tack with the p70r then what is the reason that some sailboats elect to install it? Can you program another soft button for tacking?"
Jul 23
David Harwood replied to David Harwood's discussion i50 technical info
"After a multi-year refit, my boat launched last August.  I am now attempting installation of the i50 TriData instrument in stand-alone mode (no network). Connections: 8 discreet connections on lower back of instrument. 1-3 for depth, 4-8 for…"
Jul 22
Gordon Scriba updated their profile
Jul 22
elvira replied to David Poeltl's discussion p70 installation problem
"I have a similar problem.  I have a smartpilot x30 and control head  I have the nmea 0183 connected to my garmin 7000 chartplotter  I receive the fluxgate compass data in my chartplotter, but not the data from my chartplotter in the…"
Jul 15

© 2017   Created by Moderator - Raymarine, US.   Powered by

Badges  |  Report an Issue  |  Terms of Service